Publicidad
Idiomas disponibles
Idiomas disponibles
8
Lay the drawer sides (H&I) down on a flat hard surface. Carefully line up the drawer bracket (12) with the
holes in the drawer sides (H&I) as shown.
Using a hammer, tap each drawer bracket stem part way into each hole. Repeat this process until the
drawer bracket is fully seated on the drawer side.
12
x4
finished edge
borde acabado
marked "LEFT"
marcado "LEFT"
H
bracket orientation
orientación del soporte
x2
12
12
bracket orientation
orientación del soporte
13 /19
marked "RIGHT"
marcado "RIGHT"
I
finished edge
borde acabado
B345985333W0 0
Publicidad
