Sangean U4 Instrucciones De Manejo página 24

Alarms
Your radio has 2 separate alarms which can be set to wake you
to FM/AM radio or buzzer alarm. Each alarm can be set to sound
once, daily, on weekdays or at weekends. The alarms can be set
whether the radio is on or in standby mode. In the event of a power
interruption your radio has a built in memory chip that will maintain
your alarm settings for when the power is restored. Ensure that the
clock time is set correctly before setting the alarms.
Note:
If no buttons are pressed for a while, the radio will exit the alarm
setup menu.
Setting an alarm
1. Press and hold any of Alarm button (
the radio beeps (e.g. Alarm 1 button to enter the alarm 1 setting).
2. The hour setting of alarm 1, for example, will begin to flash. Ro-
tate the Tuning Control to select the required alarm hour and
press the Tuning control to confirm the setting. Rotate the Tun-
ing control to select the required alarm minute and press the
Tuning control to confirm the setting.
3. Then the display will show the frequency options for the alarm.
Rotate the Tuning control to select the desired option and press
the control to confirm the setting.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
23
or ) until