Sangean U4 Instrucciones De Manejo página 29

Setting tuning step
. Press the Menu button to enter the menu setting.
2. Rotate the Tuning control until 'FM X KHZ' or 'AM X KHZ' shows
on the display. Press the Tuning control to enter the setting.
3. Rotate the Tuning control to choose desired FM tuning step (50
kHz or 100 kHz) or AM tuning step (9 kHz or 10 kHz). Press the
Tuning control to confirm the setting.
Auxiliary input socket
A 3.5mm Auxiliary Input socket is provided on the right side of your
radio to permit an audio signal to be fed into the unit from an exter-
nal audio device such as iPod, MP3 or CD player.
. Repeatedly press and release the Band button until AUX IN is
shown on the display.
2. Connect an external audio source (for example, iPod, MP3 or
CD player) to the Auxiliary Input socket.
3. Adjust the volume setting on your iPod, MP3 or CD player to
ensure an adequate signal level from the player, and then rotate
the Volume control on the radio as needed for comfortable lis-
tening.
Note: Never use the Aux-In socket in rainy or moist conditions to
prevent moist from entering the radio. Always keep the rubber cov-
er on the back well closed under these conditions.
GB
28