BEA SC 55/2-SPEED Instrucciones Funcionamiento página 21

Product Safety Instructions
1. Disconnect battery pack from tool or place the main switch in the locked
or off position before making any adjustments, changing accessories, or
storing the tool. Such preventative safety measures reduce the risk of
starting the tool accidentally.
2. Remove adjusting service keys before turning the tool on. A wrench or a
key that is left attached to a rotating part of the tool may result in injury.
3. Use clamps or other practical means to support or secure the work piece
to a stable platform. Holding the work piece by hand or against your
body is unstable and may lead to a loss of control.
4. Maintain tools carefully.
5. Only use accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one tool might result in
injury when used on another tool.
Important Safety Instructions for Charger & Battery Pack
1. Caution：To reduce risk of injury, only charge rechargeable battery
packs of the correct type. Other types of battery packs may burst
causing injury and damage.
2. Before using the charger, read all instructions and cautionary markings
on battery packs and chargers.
3. Do not expose charger to rain or snow.
4. To reduce the risk of damage to the electric plug and cord, pull by the
plug rather than the cord when disconnecting the charger.
5. Use of an attachment not recommended or sold by the charger
manufacturer may result in fire, electric shock, or injury to persons.
6. Make sure cord is in a position where it will not be stepped on, tripped
over, or otherwise subjected to damage or stress.
7. Do not operate charger with damaged cord or plug. Replace them
immediately.
8. Do not operate charger if it has received a sharp blow, been dropped, or
otherwise damaged in any way. Take it to an authorized center.
9. To reduce the risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning. Turning off controls will not
reduce this risk.
10. Do not disassemble charger or battery pack; take it to a qualified service
center if repair is required. Incorrect reassembly may result in electric
shock or fire.
WARNING
WARNING
21