840152800 ENv04.qxd
Cleaning Your Kettle
1 1 . . With kettle unplugged, empty any
remaining water and rinse. Allow
kettle to cool. The mesh filter may be
removed by pressing inward through
the spout with a finger. The filter will
drop into kettle cavity.
To insert the filter into the spout,
position the filter with tabs toward
spout and press filter until it fits into
place.
2 2 . . To avoid scale/lime deposit build-up,
empty kettle after each use.
• Do not immerse kettle, power base or plug in any liquid.
• Failure to follow these instructions can result in death or electrical shock.
6/22/06
3:55 PM
Page 5
wWARNING
Electrical Shock Hazard
3 3 . . Wipe the exterior of kettle with a
damp cloth. Do not use abrasive
scouring pads or powders as they
may scratch the smooth surface of
the kettle.
5 5