Black+Decker POWERCRUSH BL1275BGFP Manual De Uso Y Cuidado página 8

ASSEMBLING THE FOOD PROCESSOR ATTACHMENT
Important: Always make sure the base of the
appliance is unplugged and placed on a flat, level
surface before starting to assemble.
Important: For your protection this appliance
has an interlock system. The appliance will not
operate as a food processor unless the cover is
properly locked in place.
1. Lower workbowl over center shaft/workbowl's
base assembly and rotate bowl clockwise to
lock the two parts together.
2. Place either the chopping blade or the slicing/
shredding disc onto center shaft.
3. Place cover on work bowl with the latch
closest to the feed chute counter clockwise
from the latch to the right of the workbowl's
handle. Line up the pin on the lid with the pin
on the center shaft.
4. Gently press down the lid to depress the lower pin and rotate the cover
clockwise until cover locks into place.
5. Place workbowl onto base and twist clockwise to lock.
G E N ER A L T I P S FO R
U S I N G T HE FO O D P R O C E SS O R AT TAC HM E N T
• Organize processing tasks to avoid multiple cleanups of the bowl; process
dry before wet.
• Do not process foods that are so frozen or hard that the tip of a knife
cannot be inserted into the food.
• If a piece of hard food, such as a carrot, becomes wedged or stuck on
the blade, stop the appliance and unplug, then remove the blade. Gently
remove food from the blade.
• Meat and cheese should be well chilled before slicing or shredding.
• Insert a funnel into the feed chute when adding ingredients such as, oil,
flour and sugar.
• Do not use the food processor attachment to:
- Grind coffee beans, bones, grains or hard spices
- Slice or chop warm meat
8