HAMPTON BAY 56268 Guía De Uso Y Cuidado página 8

Assembly - Hanging the Fan
1
Attaching the fan to the electrical
box
WARNING: To reduce the risk of fire, electric shock or personal
injury, mount to outlet box marked "acceptable for fan support
of 50 lb (22.7 kg) or less" and use the screws provided with the
outlet box.
□
Pass the 120-Volt supply wires through the center hole in the
slide-on mounting bracket (A).
□
Install the slide-on mounting bracket (A) on the outlet box
(OO) by sliding the mounting bracket (A) over the two screws
(TT) provided with the outlet box (OO). If necessary, use leveling
washers (not included) between the slide-on mounting bracket
(A) and the outlet box (OO). Note that the flat side of the mounting
bracket (A) is toward the outlet box (OO).
□
Securely tighten the two mounting screws (TT).
2
□
□
OO
TT
A
8
Hanging the fan
Carefully lift the fan motor assembly (D) up to the slide-on
mounting bracket (A).
Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket (A) socket. Ensure that the tab on the
slide-on mounting bracket (A) socket is properly seated in the
groove in the hanger ball.
A
B
D