Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Select switch position I, II or III for the required airflow and temperature output.
For positions II and III the temperature can be set by using the Temperature Setting Toggle (3)
Press the Toggle on the right hand side (+) to increase the temperature in 10 degree steps.
The digital display will initially indicate the target temperature and will then revert to the
current output temperature at the nozzle. Indicating arrows (2) will flash during the build up
and will stop when the target temperature is reached.
The nozzle temperature can also be reduced in 10-degree steps by pressing the left hand
side of the toggle (-); the same flashing indicators will be seen until the new target
temperature is achieved.
To turn the Heat Gun off it is recommended that it should be set to switch position I if it has
been used in switch position II or III at the higher operating temperatures. This allows the
element to cool prior to the final switching off and will prolong the life of the heating element.
To allow the Heat Gun to cool correctly, place in its self-standing vertical position on a flat,
non-slip, stable surface away from children and people who may be unaware it could be hot
Code
137-165
137-193
137-159
Code
Airflow
L/min
137-165
300-550
137-193
300-550
137-159
300-550
06/05/2009 Version No. 1
Description
Digital Heat Gun
Digital Heat Gun
Digital Heat Gun
Power
W
2000
1500
2000
Digital Heat Guns / UK
Voltage
240 V
110 V
230 V
Plug
BS 1363/A - 3 plug 13 A -250 V
EN 60309-3 plug 16 A–4 h 100–130 V
Schuko - 2 plug 16A - 250 V
Hz
Temperature
Range
50
50-600
50
50-600
50
50-600
Weight
750g
750g
750g
3
Publicidad
