Publicidad
Idiomas disponibles
Idiomas disponibles
Heat Gun Safety Information / UK
Please read and follow these instructions when using the Heat Gun.
Failure to follow these instructions may result in the tool becoming an unnecessary source of
danger and may cause personal injury.
The Heat Gun should not be used when the tool is wet or damp or in a wet or damp
atmosphere
Do not use the tool in the rain
Do not use the tool in the presence of an explosive atmosphere
Take care when using the tool near flammable materials and ensure that hot air is not
directed for too long in the same spot.
Ensure that you are aware of flammable materials, which may be out of sight and may be
affected indirectly by conducted heat.
Plastic, Paint, Varnish and similar materials can emit toxic gases when heated. Ensure that
the area is well ventilated when working with these materials and suitable protective
equipment is worn.
Do not allow the power cord to come in contact with heat, oil, corrosive materials or sharp
edges.
Do not unplug or carry the tool by its power cord.
When using the Heat Gun in its self-standing vertical position, ensure that it is sitting on a
flat; non-slip, clean, stable surface and the power cable cannot be accidentally snagged.
Accessories should only be fitted to the Heat Gun nozzle when the tool is cold.
Take care when changing these accessories.
Following use allow the tool to cool completely as per the instructions before replacing in its
case.
Store the tool in a dry secure location and out of the reach of children.
Please keep these Instructions and Safety Warnings in a safe place
7
06/05/2009 Version No. 1
Publicidad
