AVIRE MEMCO Panachrome + 2D Guia De Instalacion página 3

4. Step by Step Guide
Fitting detector to door (Centre-Opening)
Step 1
Fitting
detector
to door
(Centre-
Opening)
Step 5
Attach cable securely with the
P-clips and screws provided. Avoid
tight bends while providing enough
slack so that cables are not stressed
or stretched as the doors move.
4. Step by step guide
Fitting Detector to Door (Side Opening)
Step 1
Using the correct mounting
bracket
Flat-Bracket for mounting
on Slampost or Leading
edge of door
Step 5
Position underside of cable end cap
and flush with top of bracket. Clip
detector into bracket
Memco is a brand of Avire
Step 2
Do not fit the Flat-Bracket to the
detector, first position bottom of
Flat-Bracket on slampost 12mm
above car sill
12mm from sill
5mm from sill
Step 2
Do not fit the Flat-Bracket to the
detector, first position bottom of
Flat-Bracket on slampost 12mm
above car sill
12mm from sill
Avire Ltd
Unit 1, The Switchback
Gardner Road
Maidenhead
Berkshire
SL6 7RJ, UK
Step 3
If L-Bracket is not fitted
then position bracket
flush with underside of
cable end-cap and
progressively clip
detector into
bracket
Step 4
Secure L-Bracket to door using
screws provided. Locate screws
approximately 75mm from top
and bottom and equally space
remaining screws.
Step 3
Remember to ensure the
detector will align exactly with the
detectors mounted on the door
when the door closes
Door
Step 4
Secure the Flat-Bracket to
the slampost using the screws
provided. Ensure screws are
centred and evenly spaced along
length of bracket.
T: 01628 540100
F: 01628 621947
E: sales.uk@avire-global.com
W: www.avire-global.com
Slam