Changing The Light Bulb - HAMPTON BAY SP5946 Manual De Usuario

Care And Maintenace (continued)

Changing The Light Bulb

The fire effect is created with the use of a 40 watt B-10 candelabra light bulb with an E-12 (small) socket base. The light bulb will have to be
replaced from time to time when it burns out. During normal operation, the stove heater will always give you simulated flame function. If the
intensity of flame suddenly increases, it means that the light bulb is going to burn out. Replace the light bulb immediately, according to the
instruction. Do not operate the stove heater when the light bulb burns out or without the light bulb.
STEP 1: Turn the main power switch off, and then unplug the power cord from the wall outlet.
STEP 2: Loosen the screws holding the light bulb cover at the back of the fireplace.
STEP 3: You will find 1 x 40W type B-10 candelabra light bulb with E-12 socket base at the bottom.
STEP 4: Replace the burned out light bulb using a new 40 watt Type B-10 candelabra light bulb.
STEP 5: Reinstall the light bulb cover.
STEP 6: Plug in the unit.
Light Bulb
Screw
Light Bulb Cover
8