Troubleshooting - HAMPTON BAY SP5946 Manual De Usuario

Troubleshooting

PROBLEM
There is no power and the logs do not glow.
Power cord gets warm to the touch.
POSSIBLE CAUSE
The unit does not have power.
Normal operation.
9
CORRECTIVE ACTION
Check that unit is plugged into a standard 120
volt outlet. Then make sure power is set at
"ON" position.
This is normal for a heater appliance as it
requires more current to operate. Check the
connections of the appliance cord and the
outlet. Make sure the plug fits tightly into the
outlet. During use, check the plug and outlet
frequently to determine if it is HOT; if so,
discontinue use of the appliance and consult
with a qualied electrician to check or change
the overheating outlet(s).
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM