Maxon 287369-01 Manual De Instrucciones página 10

LIFT CORPORATION Sht. 10 of 42 DSG#
19. Connect low pressure hose (Kit item) to elbow
on pump block and connector on hand pump
using two hose clamps (Kit items) (FIG. 10-1).
CAUTION
Hydraulic lines and fittings must
be torqued as shown in FIG. 11-1
and TABLE 11-1.
20. Reposition elbows, connectors and hoses
as required. Then, torque the fittings as
shown in FIG. 11-1 and TABLE 11-1.
© MAXON Lift Corp. 2017
HOSE CLAMP
(P/N 251854)
(2 PLACES)
M-13-07
ELBOW
CONNECTING LOW PRESSURE HOSE
FIG. 10-1
Rev. - Date: 07/12/17