Descargar Imprimir esta página

Electrical Connection - Aspen Pumps HEAVY DUTY 6 Manual Del Usuario

Bomba de eliminación de condensación

Publicidad

EN
heavy duty 6 & 10
CONDENSATE REMOVAL PUMP
With an impressive flow rate, these robust and reliable Heavy Duty pumps are
perfect for the rapid removal of large quantities of condensate water.
Description: The pump is designed to collect
condensated water from Air Conditioning and
Refrigeration Plant. The pump is triggered by an
internal float switch at a factory set level, and
discharge the condensate to a recommended
maximum head. The internal low current safety
float switch is pre-wired to give a normally closed
set of volt free contacts to enable the plant to be
switched off or an alarm to be triggered in the
event of pump failure.
Installation Notes: This pump is designed to sit
level on its base. Ensure that there are no kinks
or trapped parts in the discharge piping, which
must have an internal diameter of 9mm. Fix the
pipes with cable ties to the pump inlet and outlet.
IMPORTANT: The pre-wired safety switch
MUST ALWAYS be utilised.
Service Guide: Flush the pump through with an
anti-bacterial wash every 6 months to avoid sludge
build-up in the pump housing. NB: The contractors
should satisfy themselves that any chemicals used
are compatible with the working of the pump.
IMPORTANT: Pump should be filled with
water until motor runs, check for leaks and
proper discharge of water.
HEAVY DUTY 6 & 10 @ 230 VAC 50Hz
Max. flow
Max. rec. head
Tank capacity
Sound level@1m
Power supply
Rated
Class
Max. unit output
Max. water temp
Inlet/outlet
IP Protection
Safety switch
HD6: 900L/h, HD10: 1070L/h
HD6: 6m, HD10: 9m
4L
HD6: 60dB(A), HD10: 64dB(A)
HD6: 230 VAC 50Hz 1.5A
HD10: 230 VAC 50Hz 0.38A
HD6: Non continuous
HD10: Continuous
I appliance
HD6: 1200kW / 4m Btu/h
HD10: 1460kW / 4.9m Btu/h
o
o
40
C / 104
F
x2 40mm in,10mm out
IP20
3.0A Normally closed
10
Heavy Duty 10: 9m max. recommended head
8
6
4
2
0
200

ELECTRICAL CONNECTION

Brown
Blue
Green / yellow
2 x Black
Safety float
switch
Pump
Normal float
motor
switch
6m max. recommended head
Note: Tested without
non return valve
230 VAC 50Hz
400
800
LITERS PER HOUR
Live
Neutral
Earth
Safety float switch
Heavy Duty 6:
1000
1200
Black
Black
Live
Neutral
Earth

Publicidad

loading

Este manual también es adecuado para:

Heavy duty 10