Exemption From Liability; Intended Use; Features - Olympia A 296 Manual De Instrucciones

Exemption From Liability

We cannot guarantee that the information which relates to the technical
properties of the product or to the product itself contained in this document is
correct. The product and, where applicable, its accessories, described in this
document are subject to constant improvement and further development.
For this reason, we reserve the right to modify components, accessories,
technical specifications and related documentation of the product described
herein at any time without notice.

Intended Use

This laminator has been conceived for use processing hot laminating foil. It
is possible to laminate pictures, maps, documents, paper etc. up to a total
thickness of 0.4 mm. Any other use is considered unintended use. Unauthor-
ised modifications or reconstructions are not permitted.
Safety note:
The power socket must be close to the unit and easily accessible. This en-
ables you to disconnect the unit from the power supply quickly in an emer-
gency.

Features

Protection and refinement of your documents.
Laminate photographs, documents, graphics, identity cards etc. up to A4
size. The unit operates using 2 heating rollers, has a quick warm-up phase
and laminates without a carrier.
2 LEDs indicate the operational states "Power = unit switched on"
and "Ready"
Automatic switch-off in the event of overheating
High quality heating system prevents smudging and blistering
Warm-up phase approx. 5 - 10 minutes
Cool down phase to room temperature, approx. 30 minutes.
Foil thickness, minimum 75 m and maximal 125 m
Laminating system:
Working width:
Maximum foil thickness:
Laminating speed:
Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Hot roller technology
238 mm (A4)
75 – 125 micron
300 mm/min
220 - 240 Volt, 50 Hz
350 W
400 x 290 x 110 mm
Approx. 1.6 kg
13