APLIC 303340/20191008DG006 Manual De Usuario página 8

4. Commissioning
Take the device out of the package and remove all the packaging material.
Connect the antenna to your desired device, e.g. a TV set. Then please supply the
antenna with power by connecting the USB lead of the amplifier with a USB port
of your TV or PC or a USB charger. The USB connection of the cable can be con-
nected, for instance, to the USB port of your TV (if available) or with the supplied
5V power adapter.
To ensure that the amplifier or antenna is working, check whether the green
"POWER"-LED on the amplifier lights up.
Important note: In order to be able to operate the antenna correctly, we kindly
ask you to use the supplied USB power supply. The current consumption of the
antenna is only 33mA. This is sufficient for a standard USB port.
5. Additional note
If only a few or no stations are found during scanning, then the reason for this lies
mostly likely in the installation site of the antenna. Check if the cable is properly
connected, change the position of the antenna, and scan once again. Ensure that
there are no objects near the antenna, which could shield the DVB-T / DVB-T2
signal. A location near a window is highly recommended.
On Internet you can find different websites, which indicate the signal strength of
the DVB-T / DVB-T2 signal in your region. If you have any further questions, do
not hesitate to contact our Customer Service.
Note: This antenna is suitable only for DVB-T and DVB-T2. UKW radio reception is
not supported.
8
English