Sleep Timer; Temperature Display - Brandt BCR150P Manual De Instrucciones

Checking alarm time
Press VOL-/AL1 or VOL+/AL2, the alarm time will briefly appear on the display.
To turn off the alarm, press AL.OFF/ °C/ °F and the alarm will come on again at the set time on the
following days.
To cancel the alarm, press VOL-/AL1 or VOL+/AL2 until the alarm indicator light goes out on the display.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes once the alarm is activated.
When the snooze button is pressed, the buzzer alarm sounds will stop and sound again after about 9
minutes.
The alarm indicator light will flash.

SLEEP TIMER

The sleep function is designed to automatically turn off the Radio.
In the Radio mode, repeatedly press SLEEP select the desired sleep time from 120, 90, 60, 45, 30 or 15
minutes.
The radio will be turned off after the set sleep time has elapsed.
To check remaining sleep time, press SLEEP.
To turn off the radio before the sleep time has elapsed, press POWER.
DIMMER
Press SNOOZE/DIMMER. The display will become dim.
TIME PROJECTOR
Press any button to light up projection lamp, after 30 seconds it will automatically turn off.

TEMPERATURE DISPLAY

Repeatedly press AL.OFF/ °C/ °F to check current Celsius/ Fahrenheit temperature.
SPECIFICATIONS
Power consumption: 3W
Backup battery for clock: AA 1.5V x 2
FM: 87.5-108 MHz
Input: DC 4.5V 500 mA
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may
occur as a result of product improvement and development.
Darty Plc© UK: EC1N 6TE 21 / 11 / 2013