GreenWorks GPW 1702 Manual Del Operador página 21

CHANGING THE SPRAY TIP
W A R N I N G
NEVER change spray tips without engaging the lock-out on the trigger handle and NEVER point the
wand at your face or at others. The quick-connect feature contains small springs that could eject the
spray tip with some force. Failure to heed this may cause personal injury.
Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.
Engage the lock-out on the trigger handle by pushing the trigger lock button into the slot.
Pull back the quick-connect collar on the spray wand.
Push the spray tip into place in the spray wand.
Push the collar forward so that the spray tip is secured properly. Check to see that the spray tip is
secure.
Spray Tip
1
Spray Wand
SPRAY TIP
Green - Narrow fan tip (25° )
O
25
White - Wide fan tip (40° )
O
40
(See Figure 10.)
2
3
The green pressure washer tip provides high versatility with its 25 degree angle
tip. Referred to as the washing tip, because it provides adequate pressure to
remove dirt from surfaces, but is designed to not damage many surfaces. This
pressure washer tip is designed for "sweeping" foliage or debris given its wide
angle. This tip is versatile due to its wide area of cleaning and strong pressure
application.
The white 40 degree tip, referred to as the "fan" tip creates the widest area of
cleaning with relatively low pressure. This pressure washer tip is best used for
light or delicate cleaning applications. It is recommended for light cleaning on
wood decks and other soft or delicate surfaces.
OPERATION
1-Pull back the quick-connect collar
2-Push the spray tip into place
3-Push the collar forward
Fig. 10
APPLICATION
EN - 18