Programming Your Coffeemaker; Making Coffee - Cuisinart DCC-1150 Serie Manual De Uso

PROGRAMMING YOUR
COFFEEMAKER
TO BREW COFFEE
1. Turn the function knob to "Brew."
2. Press the On/Off button and release.
The red On indicator light will illuminate
and brew cycle will begin.
TO TURN THE COFFEEMAKER OFF
Press the On/Off button and release.
Note: This coffeemaker shuts off automatically
after brewing is complete.

PROGRAMMING YOUR COFFEEMAKER

FOR DELAYED BREW TIME
To set the time:
1. Turn the function knob to "Clock."
a. Set Hour: Press and hold the Hour
button to scroll through numbers
quickly. When number displayed
approaches the desired setting, press
and release (pulse) the button to
advance one digit at a time. After
setting the correct hour, the default will
be the last time set unless power is
shut off.
NOTE: When the number count passes 12,
the PM light will be displayed on the LCD.
b. Set Minutes: Press and hold the
Minute button to scroll through
numbers quickly. When number
displayed approaches the desired
setting, press and release (pulse) the
button to advance one digit at a time.
After setting the correct minute, the
default will be the last time set unless
power is shut off. To finish setting time,
turn the Function Knob to any other
setting or simply wait until the numbers
stop blinking.
To program the Auto On (brew start time)
1. Turn the function knob to "Prog."
2. Set the time you want coffee to begin
brewing by using the minute and hour
push-buttons. Follow the same
instructions you used to set the time of
day, in the To set the time section above.
3. Turn the function knob to "Auto On." LCD
will display the current time.
4. Press the On/Off button and release. The
green indicator light will come on to
remind you that the programming function
is in use. At the programmed time, the
red indicator will come on as well,
indicating that the brew cycle is starting.
Both lights will go off when keep warm
cycle ends.
NOTE: To reactivate the auto-on feature to
start brew cycle at the same time another day,
simply press the On/Off button and release.
The green Auto-On light will illuminate.
1 - 4 Cup Setting
The 1- 4 cup setting button is used when you
make small amounts of coffee. The 1-4 cup
setting basically double heats the water,
making your smaller amount piping hot.
To use: When making a smaller amount, press
the 1-4 button on the control panel after
turning on the unit.
Power Loss Back-up
One-minute protection in case a breaker trips,
the unit is unplugged, or the power fails. It
holds all programmed information, including
time of day, auto on time and auto off time.
7