How To Dismantle Parts; Ice Storage Bin - LG LSC20913TT Guía De Usuario

Care and maintenance
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Space plus

Ice storage bin

After dispenser
is used
After dispenser
is used

How to dismantle parts

NOTE
Dismantling is done in the reverse sequence of assembly.
•
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
To remove a shelf, push the shelf to the left ,
lift the left part of the shelf a bit , lift the right
part up , and take it out.
Lift the door rack holding both sides ( ) and
pull it out to ( ) direction.
Lift the space plus ( ) and pull it out to ( )
direction.
Hold the ice storage bin as shown in the right
figure and pull it out ( ) while slightly lifting it
( ).
It is recommended not to dismantle the ice
storage bin unless it is necessary.
Be sure to use both hands when removing
the ice storage bin, so as not to drop it on the
floor.
If the ice storage bin does not fit well, slightly
rotate the rotating device.
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.
Pull the cover fully to the front
the rear end of the cover
Clean the floor and cover with a dry cloth.
③
21
and pull up
①
slightly to pull it out.
②