Introduction; Entry; Important Safety Instruction - LG LSC20913TT Guía De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Introduction

Entry

The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.
Important safety instructions
Before use, this refrigerator must be properly installed and located in accordance with
the installation instructions in this manual.
Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly
and pull it straight out from the outlet.
When moving your appliance away from the wall, be careful not to roll over the power
cord or to damage it in any way. Do not crush or damage the water line.
After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when your hands are damp or wet. Skin could adhere to
these extremely cold surfaces.
Unplug the power cord from the power outlet for cleaning or other requirements. Never
touch it with wet hands because you can get an electric shock or be injured.
Never damage, bend, kink, pull out, or twist the power cord because damage to the
power cord can cause product failure, fire, or electric shock. If you have doubts the
appliance is properly grounded, consult a qualified electrician.
Never place glass products in the freezer because they may be broken from expansion
when their contents are frozen.
Never put your hands within the ice storage bin of the automatic icemaker. You can be
injured by the operation of the automatic icemaker.
The appliance is not intended for use by young children without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Never allow anyone to climb, sit, stand, or hang on the door. These actions may
damage the refrigerator and even tip it over, causing severe personal injury.
Recommended
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical connection.
grounding
method
A 115 Volt, 60 Hz., AC only, 15 or 20 amp, fused and grounded
single-outlet circuit is required. Use an outlet that cannot be turned
off by a switch. Do not use an extension cord.
Accessibility of
The refrigerator-freezer should be so positioned that the supply
supply plug
plug is accessible for quick disconnection in the event of an
emergency.
Supply cord
If the supply cord is damaged, it must be replaced by the manufacturer or its service
replacement
agent or a similarly qualified person in order to avoid any hazard.
Warning
Do not modify or extend the Power Cord length.
3
Date of purchase
Dealer
Dealer address
Dealer phone no.
Model no.
Serial no.
It may cause electric shock or fire.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Lsc20913sw

Tabla de contenido