Dodge Journey 2009-2010 - Metra 95-6511 Manual Del Usuario

Dodge Journey 2009-2010

(modifications to radio cavity required)
1. Unclip and remove the entire factory
radio trim panel including the A/C
controls. (Figure A)
Tip: Open the compartment door at
the top of the radio trim panel.
2. Remove (4) 7mm screws securing radio
to dash to remove. (Figure B)
Note: The top of the metal bracket
in the sub dash will need to be cut to
allow for the clearance of the Double
DIN radio's chassis. (Figure C)
Continue to Kit Assembly
8
DASH DISASSEMBLY
OFF
PUSH PUSH PUSH
PUSH ON PUSH AUDIO/SELECT
AM LIST
FM MUSIC
TYPE
DISC SEL;ECT
VOLUME TUNE/SCROLL
AUX
1 2 3 4 5 6
SET AUX
OUTLET
(Figure A)
POWER
OUTLET
SEEK SEEK SCAN U TIME INFO RW FF
PUSH ON PUSH AUDIO/SELECT
AM LIST
MUSIC
FM
TYPE
DISC SEL;ECT
VOLUME TUNE/SCROLL
AUX
1 2 3 5 6
SET 4 AUX
POWER
OUTLET
(Figure B)
(Figure C)
Dodge Caliber 2009-2012
Dodge Challenger 2008-2014
Jeep Compass 2009-2017.5
Jeep Patriot 2009-2017
1. Unsnap and move shifter trim to the
side. (Figure A)
2. Unsnap center dash trim panel (do
not remove until climate controls are
removed). (Figure A)
3. Remove (4) Phillips screws holding
climate control panel to backside of the
center dash panel.
4. Remove (4) 7mm screws securing radio.
Unplug and remove radio.
5. The metal bracket in the sub-dash will
need to be removed for the aftermarket
Double DIN radio's depth.
Continue to Kit Assembly
(Figure A)
|
1.800.221.0932 MetraOnline.com