golmar G2+ NEXA MODULAR Guía Rápida página 4

NEXA MODULAR G2 VIDEO DOOR ENTRY SYSTEM - BUILDING +
SAFETY PRECAUTIONS
Always disconnect the power supply before installing or making modifications to the devices.
-
The fitting and handling of these devices must be carried out by authorised personnel.
-
The wiring must run at least 40 cm away from any other wiring.
-
- On the power supply unit (FA-G2 ): +
Do not overtighten the screws on the connector.
w
Install the power supply unit in a dry and protected place free from the risk of water leaks or sprays.
w
Avoid locations that are humid, dusty or near heat sources.
w
Ensure that the air vents are free from obstruction so that air can circulate freely.
w
To avoid damage, the power supply unit must be firmly secured in place.
w
To prevent electric shock, do not remove the cover or handle the wiring connected to the terminals.
w
CHARACTERISTICS
( )
*
- Video door entry system with simplified wiring (non-polarised 2-wire bus).
- 1 access panel per installation.
- Up to 3 monitors and apartments with a 2 ART 4/G2+
- Up to 3 monitors and apartments with a 2 ART 7/G2+
- Up to 3 monitors and apartments with a 2
monitor can activate Wi-Fi transmission
- Up to 4 monitors per apartment.
- Up to 8 monitors n paral el ( i l in 1 output (to monitor) of the distributor).
- Up to 12 monitors in parallel (installation without distributors) per installation.
- Up to 8 monitors/ apartments with push button "HZ" activated at the same time (with system and monitors
in standby).
- Video module EL632 G2 + P/T with pan and tilt mechanism to adjust the telecamera position.
- Call confirmation tone.
- Visual signals on the door panel for people with impaired hearing (indicating call process,
communication, door open and channel busy).
- Audible signals on the door panel for people with impaired vision (indicating call in progress, missed
call, door open and call finished).
- Door opening timeable from monitor (up to 10 seconds), see corresponding monitor user manual.
- Relay 1 and relay 2 output to activate the DC or AC lock releases actuated by relay.
SYSTEM OPERATION
( )
*
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being
made and LED will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating
that a call is being made. At this moment, the apartment's monitors receive the call. If another apartment is
called by mistake, press the button for the correct apartment and the first call will be cancelled.
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists)
without the visitor knowing and icon displayed on the screen will blink green. To view the image from slave
monitors 2 or 3, press on one of the buttons of the ART 4/ ART 7 monitor or
monitor for the image to appear. If the call is not answered within 45 seconds, LED
will become free.
- To establish communication, press the button below off-the-hook icon
the-hook icon on the screen of the ART 7W monitor
- Connection will last for 90 seconds or until is pressed the button below
monitor or is pressed on-the-hook icon on the screen
will turn off and the system will become free. If vocal synthesis is enabled, a 'Communication is finished'
message will indicate that the call is over.
- To open door or of the door panel , press the corresponding button below of the ART 4 /ART 7 monitor or
1 2
press the corresponding icon on the screen of the ART 7W monitor
one press will activate the lock release for seconds and LED 3
is enabled, a 'Door open' message will be indicated on the door panel. is
- Detailed operation and configuration of the monitor
( ) For more information, see the "T632 G2 P/T (code 5012
+
*
https://doc.golmar.es/search/manual/50122528
monitor per installation.
monitor per installation.
Only the master
ART 7W/G2+ monitor per installation .
(FA-ART 7W power supply unit required for apartment
press the screen of the ART 7W
will turn off and the system
of the ART 4 / ART 7 monitor or
. Door panel LED will turn off and the led will
on-the-hook icon of the ART 4/ ART 7
of the ART 7W monitor . When communication ends, LED
during the call or communication processes:
will also turn on for seconds. If vocal synthesis 3
, see the corresponding monitor user manual .
2528 )" user manual.
2
NEXA MODULAR G2 VIDEO DOOR ENTRY SYSTEM - BUILDING
INSTALLATION OF THE DOOR PANEL
( )
*
1650
EL632 G2 P/T
ART 4/G2+
).
Code Monitor
ON DIP
C. 1 3
1 2 3 4 5 6 7 8
ON DIP
C. 10
1 2 3 4 5 6 7 8
ON DIP
C. 08
1 2 3 4 5 6 7 8
ON DIP
C. 06
1 2 3 4 5 6 7 8
ON DIP
C. 04
1 2 3 4 5 6 7 8
ON DIP
C. 02
1 2 3 4 5 6 7 8
( ) Description and settings:
*
- Description of the
- Description of the visuals signals on the door panel.
- Description of the door panel lighting LEDs for low light conditions
- Description of the
- Selecting vocal synthesis language (factory default: Spain) & P1 and P2 ext. button description.
- Ajusting telecamera (
( )
Audio level jumper description (vocal synthesis and tones mode):
*
The jumper for volume control is locate
module .
press off-
turn on .
The jumper for volume control, allows to select between a minimum, maximum
or mute of the vocal synthesis and tones mode from
1 2 3
1 ( ) Jumper placed between 2 and 3, set to minimum volume the vocal synthesis
and tones from the door panel.
1 2 3
Jumper placed between 1 and 2 set to maximum volume the vocal synthesis
and tones from the door panel.
1 2 3
Jumper removed, set to mute volume the vocal synthesis and tones from the door panel.
1 ( )
Factory default.
( ) For more information, see the "T632 G2 P/T (code 5012
*
https://doc.golmar.es/search/manual/50122528
EN
+
Embedding box dimensions:
M dul s o e 1 2
Model N CE 90C V S N CEV90C
1850
1450
W (width) 99 99
H (height) 132,5 2 38
D (depth) 56,5 56
/ +
Code Monitor
ON DIP
C. 30
1 2 3 4 5 6 7 8
ON DIP
C. 28
ART 4/G2+
1 2 3 4 5 6 7 8
ON DIP
C. 26
1 2 3 4 5 6 7 8
ON DIP
C. 24
Code Monitor 1 2 3 4 5 6 7 8
ON DIP
ON DIP
C. 32 C. 22
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
EL610D
ON DIP ON DIP
C. 09 C. 20
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON DIP ON DIP
C. 07 C. 18
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON DIP ON DIP
C. 05 C. 16
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON DIP ON DIP
C. 03 C. 14
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON DIP ON DIP
C. 1 0 C. 12
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
video module EL632 G2+ P/T DIP switch:
(
vocal synthesis audible signals on the door pane (
pan and tilt mechanism) .
d on the left side of the back of the
the door panel.
,
+ 2528
3
3
CEV90
99 mm.
328 mm.
56 mm.
EL610D
Code Monitor
ON DIP
C. 29
1 2 3 4 5 6 7 8
ON DIP
C. 27
1 2 3 4 5 6 7 8
ON DIP
C. 25
1 2 3 4 5 6 7 8
ON DIP
C. 23
1 2 3 4 5 6 7 8
ON DIP
C. 1 2
1 2 3 4 5 6 7 8
EL610D
ON DIP
C. 19
1 2 3 4 5 6 7 8
ON DIP
C. 17
1 2 3 4 5 6 7 8
ON DIP
C. 15
1 2 3 4 5 6 7 8
ON DIP
C. 13
1 2 3 4 5 6 7 8
ON DIP
C. 1 1
1 2 3 4 5 6 7 8
).
l).
1 ( )
1 2 3
1
_
+
C1 NA1
Relé 1
)" user manual.
EN