Display Button; Headphone Jack - memorex MX4137 Guía Del Usario

OPERATING INSTRUCTIONS (CONTINUED)

DISPLAY BUTTON

1
EQ (EQUALIZER)
1
1
With the power on, press the EQ
button to cycle through the preset
EQ settings or to turn the EQ off.
Each press of the EQ button will
cycle as follows: CLASSIC,
ROCK, POP, JAZZ, Off.
NOTE: If the X-BASS is ON when
you press the EQ button, the X-
BASS function will be off. Press
the EQ button repeatedly to set
the desired EQ settings."
1
WHILE IN THE RADIO OR CD STOP MODE:
Press the DISPLAY button on the remote once to show the clock on
the display. Press a second time to show the timer's On Time. Press
again or wait five seconds and the display will show the radio
frequency or total tracks/time of the CD.
WHILE PLAYING A CD:
Press the DISPLAY button on the remote once to show the
remaining time of the CD on the display. Press a second time to
show the clock. Press a third time to show the timer's On Time.
Press again to show the elapsed time of the CD.
NOTE: While the display is showing the clock or timer's on time, after
five seconds, it will return to display the elapsed time of the CD.
WHILE IN THE LINE IN MODE:
Press the DISPLAY button on the remote once to show the timer's
On Time. Press again or wait five seconds and the display will show
the clock.
MUTE
1
To temporarily mute the sound,
press the MUTE button on the
remote control; "MUTE" will
appear in the display and the
sound will be muted. Press the
MUTE button again to restore the
sound and "MUTE" will disappear
from the display.
1
9

HEADPHONE JACK

1
To listen to the unit through
headphones, simply insert the
headphones (not included) into
the Headphones jack. The
speakers will be disconnected
when the Headphones are
plugged in.
2