Listening To The Radio; Manual Tuning; Automatic Tuning - memorex MX4137 Guía Del Usario

OPERATING INSTRUCTIONS (CONTINUED)

LISTENING TO THE RADIO

1
Press the POWER button to turn
the unit on.
4
2
1
MANUAL TUNING: Repeatedly
press the Tune/Skip/Search o 1
or n 2 button to manually
advance the frequency in the
display up or down until the
desired frequency appears.
7
Adjust the EQ button
VOLUME buttons (and the X-
BASS button on the remote) as
desired.
2
Press the TUNER Function button
to select the radio.
NOTE: You can also repeatedly
press the FUNCTION button on
the remote to select the tuner.
5
2
1
AUTOMATIC TUNING: Press
and hold the Tune/Skip/Search o
1 or n
frequency in the display starts to
scan, and then release the button;
the tuner will search and then
stop on the next strong station it
finds. Repeat this step until the
desired frequency appears in the
display.
Hints for Better Reception
AM–The AM ferrite bar antenna is located inside the unit. It may be
1
necessary to turn the unit slightly so that the internal antenna is
pointing in the direction of the AM transmitter. You may have to
2
experiment to find the position that provides the strongest reception
2
for each of your favorite AM stations.
and
FM–Extend the FM wire antenna for best FM reception.
2
2
2 button until the
10
3
Press the STOP/BAND ( ) button
to select AM or FM.
6
Press the ST/MO button on the
remote while listening to an FM
station to cycle between the FM
stereo and mono modes.
NOTE: If FM STEREO
selected and you have tuned to
an FM Stereo station, "ST" will
light in the display.
1
2
is