ARDES ARM283A Folleto De Instrucciones página 9

Instructions for use
GB
Insert the batteries in the appropriate seat, making certain that
they have the right technical characteristics as indicated on the
appliance.
The appliance is equipped with 2 speeds and 2 directions of
rotation.Select one of the interchangeable accessories and begin
the treatment by positioning the switch on the desired speed and
direction of rotation.
In order to ensure an optimum performance it is advisable not to
wash the feet or hands before the treatment. Once the treatment
is finished, rinse the treated parts.
Whenever you need to change the accessory make sure that the
appliance is switched off.
It is advisable to keep the appliance switched off for at least 15
minutes after finishing a 20 minutes operating cycle.
WARNING!
Stop the treatment at regular intervals to verify the results
obtained up to that moment.
This is recommended particularly in the case of diabetics since
sensitivity in their limbs may be impaired.
Accessory functions.
Rough Polishing Disks: used for shaping or filing thick or hard
nails.
Polishing Disk: used for shaping or buffing nails.
Pointed coarse cone: for removing and treating the surfaces of
foot nails.
Pointed thin cone: for removing dead skin and treating ingrown
nails. Glide the tool around the nail with inward movements.
Cuticle shaper: for pushing back cuticles.
9