Intenso MEDIATALENT Operación Manual página 16

f) Changing the settings
In the main menu, select the Setup function. Navigate with the ▲, ▼ to the desired menu item.
There are Common, ECO, Time and Multimedia. Confirm your selection with the Play/Pause
[ ] button to set your individual unit.
Settings
Language
Product Information
General Firmware Update
Setup
Factory Settings
Auto Run
Brightness
ECO
Turn Off
Repeat mode
Video
(Multimedia)
Scalar
Photo Mode
File
Photo
Background music
(Multimedia)
Diashow
Display duration
Scalar
A sequence of
reproduction
Description
Select the desired language.
Displays the current firmware version.
Should a firmware update be available at www.intenso.de the update
can be installed through here.
Reset the device to the factory settings.
Pick the mode your photo frame will begin on after turning on. (Photo,
Calendar, Last used function).
Adjust the brightness of the TFT Display.
Set the amount of time of inactivity which will turn off the photo frame.
Play all
Repeat all
Repeat the actual
No repeat
Setting the display format for the video mode (cinema, or the original full
image).
Selection of the different visualisation modes for the photo visualisation.
You can choose the following: simple photo visualisation, photo
visualisation with shown clock, photo visualisation with shown calendar
sheet and pin board with 4 photos shown at the same time.
Selection of list for the photo reproduction.
Turning the background music on or off (if music files are available
incurred in storage media).
Setting up of the passage effect.
Setting the display duration of each image during the slide show.
Setting the display format for the photo mode.
Selecting between the normal and random sequence.
EN - 5
All the supported video are played
1x.
All the supported videos are
repeated as an infinite sequence.
The current selected video is
repeated in an infinite sequence.
The current selected video is
played 1x.