Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Warnings
•
Insert and remove the memory card and power supply only when the
camera is turned off.
•
It is recommended to use good quality AA/R6 batteries to prevent
corrosion and acid leakage inside the camera.
•
Use only a 12V/2A power supply to power the camera and do not reverse
the polarity when connecting the batteries.
•
In test mode, the camera will turn off automatically in 3 minutes if no
button is pressed.
•
Do not turn off the power to the device while the software update is in
progress. Our recommendation is to send the product to the seller for the
software update procedure, in order to eliminate the risk of irreparably
damaging the product.
•
Remove branches or moving objects from the monitored area that may
cause false triggers and photos.
•
Do not place the camera near equipment that emits heat, near fans, or
light sources to avoid taking false photos.
•
The camera uses a 58 ° FOV lens and 60 IR LEDs. To ensure that the IR
LEDs give enough IR light, use only high-quality AA batteries that can
provide enough power and light constantly in dark environments.
•
The camera works well if it is located at a distance of 10 - 15 cm from the
ground. If it is too close to the ground, the motion sensor will not work
properly. The motion sensor detects remotely and down.
Key functions
•
Trigger time of only 0.4 seconds
•
Lens 58 ° FOV, 52 ° PIR
•
Selectable photo resolution 8/12/24 MP
•
60 IR LEDs that offer visibility of up to 20m (65 feet) at night
•
Clear and quality images both during the day and at night
•
Consecutive photos taken at a speed of 1 photo/second maximum 5
consecutive photos; Adjustable PIR sensitivity, programmable delay
between movements, Time Lapse, Timer, label on the picture (camera
ID, date/time, temperature, phase of the month)
•
Working temperature: -26°C ~ +60°C
User manual
14
Publicidad
Tabla de contenido
