1. Unclip and remove trim panel from
above glove box. (Figure A)
2. Unclip upper edge of panel below
steering column and let hang. Not
necessary to remove completely.
(Figure B)
3. Unclip and remove small trim panel to
right of ignition switch. (Figure C)
4. Unclip and remove trim panel
surrounding radio and climate controls.
(Figure D)
5. Remove (4) 9/32" screws securing
radio. (Figure E)
Continue to kit assembly
(Figure A)
Dash Disassembly 99-3303
Chevrolet Cobalt
2005-2006
(Figure B)
(Figure C)
(Figure D)
(Figure E)
6