Philips HD 4614-17 Manual Del Usario página 5

Cleaning
• Disconnect the base unit from the mains before
cleaning.
• The outside of the appliance can be cleaned by
simply wiping with a cloth moistened with soapy
water.
• Do not use abrasive cleaners, scourers etc.
Filterline scale filter
Limescale deposit
Limescale is a harmless deposit which is naturally
formed when hard water is heated.
The amount of scale deposit (and thus the need to
descale your kettle) largely depends on the
hardness of the tapwater in your area and the
frequency with which you use your kettle.
Limescale is not harmful to your health, but it
gives a powdery taste to your beverage.
The "Filterline" scale filter (G) is designed to
prevent scale particles from being poured into
your beverage by trapping them within the kettle.
The scale filter is removable to enable cleaning
and replacement.
Cleaning the scale filter
As the scale filter traps the scale particles it needs
regular cleaning to maintain easy filling and
pouring of the kettle.
The scale filter can be cleaned by
- removing it from the kettle (make sure no hot
water is in the kettle)
- and running it under the tap while gently
brushing with a nylon brush (fig. 6)
- and/or by soaking the filter in vinegar or a
proprietary descaling agent overnight.
You can also clean the scale filter by leaving it in
the kettle during descaling of the whole appliance.
See under "Descaling your Kettle".
After the scale filter is cleaned, simply replace it in
the kettle until it clicks into position (fig. 7).
Make sure never to leave the scale filter loose
inside the kettle.
Replacement scale filter
Replacement scale filters for types HD 4614-17
can be obtained from your Philips dealer under
type nr. HD 4965.
(type HD 4617)
Descaling your kettle
Excessive limescale shortens the element life and
may result in the kettle not operating properly.
To ensure continued performance, descale your
kettle regularly.
The frequency depends on water conditions and
amount of use. Descale using a proprietary
descaling agent and follow the manufacturer's
instructions.
Alternatively, proceed as follows:
- Boil 700 ml of water in your kettle.
- After switch-off, add 300 ml of normal (8%)
vinegar to the water in the kettle.
- Leave the solution to stand in the kettle
overnight.
- Empty the solution out and rinse the inside of
the kettle thoroughly with clean water.
- Fill the kettle with clean water upto "MAX" and
bring to a boil.
- Empty the kettle and rinse again with clean
water.
If scale remains, repeat the procedure.
5