AccuBANKER Silver S2500 Manual De Usuario página 9

MG:
• Magnetic verification of the bill (
Press and hold the MG key for 3 sec. and the current MG-5 sensitivity level will
appear on the screen. Using the numeric keypad, select the new desired
sensitivity level within the range 1-9, where "1" is the minimum and "9" is the
maximum sensitivity.
LEVEL (IR):
•
Allows you to adjust the intensity of the counting sensors depending on the
physical state of the bills. The intensity can be adjusted in the range 1 - 9.
A / M:
•
Selection of automatic or manual start mode
In Automatic mode, the equipment begins counting when the user places the bills
on the hopper tray. In Manual mode, the user controls the start of the count by
pressing START. "AUTO" will be displayed on the screen when the equipment is
in Automatic mode.
C:
• (Clear) Used to erase the count data from the screen
BATCH: Enables or disables batch counting
•
By pressing the Batch key repeatedly, the user can choose between the
default grouping options. If the batch quantity needed does not appear in
the default options, the user can manually key in a different batch value.
The equipment stops counting when it reaches the selected/keyed batch
amount of bills.
START: Press START to begin counting in Manual mode
•
Press START to validate any change in the sensitivity setting of the
detection functions.
Adjusts the intensity of the counting sensors
Equipment Overview
available only on the MG/UV model)
9
cont.