Installing Support Arms And Wall Plate Cover - PEERLESS Paramount PS200 Instalación Y Ensamblaje

Installation of Support Arms
Hook support arms (A) onto wall plate (B) using hooks on support arms as shown in figure 3.1. Hooks of vertical
3
brackets (A) must be engaged securely into wall plate as shown in detail 1.
Note: Thumb screws located underneath the support arms (A) can be turned for fine tuning level adjustment of the
mount as shown in figure 3.2.
A
fig 3.1
DETAIL 1
Attach wall plate cover (C) to wall plate (B) as shown in figure 4.1. Tabs on the back of cover (C) are placed into
4
notches in the back of wall plate (B) as shown in figure 4.2.
fig 4.1
B
B
A
C
B
fig 3.2
fig 4.2
C
B
(BACK OF WALL PLATE)
WALL NOT SHOWN FOR CLARITY
THUMB
SCREWS
TAB