EN
5. "Do not Disturb" function
The privacy button
to block the staff access.
Activation: when the door is closed, push the button. If you click it many
Deactivation: opening the door, the function "Do not Disturb" doesn't work.
Note: with the Activation card you can enter the room even keeping active the
button "Do not disturb".
6. How to use the cards to open the doors
Activation Card
Guest Card
Operator Card
7. Function Hold-Open Card (the card is provided on request)
Hold-Open Activation
8. Batteries management
Type: alkaline type AA (LR6)
Duration: about 18/24 months (on the basis of the use intensity).
Warning: use 3 batteries with the same level of power and brand.
Warning of low batteries
GUEST
100%
10%
5%
0%
Note: With dead batteries, to open the door from the hallway side, it is necessary to use the emergency cylinder (see
10
the paragraph "How to open the lock in case of emergency").
placed in the internal side of the room allows the guest
times, it stays active.
With closed door and "Do
not disturb" disabled
It opens the door
It opens the door
It opens the door
1. Approach the Hold-
Open Card to the reader
of the lock in closed
position
2. The room door is open
in a permanent way (hold-
open device).
Access
LED signal
None
With closed door and
activated "Do not disturb"
It opens the door
It opens the door
It doesn't open the door
Hold-Open Deactivation
OPERATOR
Access
100%
10%
5%
0%
With open
door
Programme
1. Approach the Hold-
Open Card to the reader
of the lock in open
position.
2. The Hold-Open function
is now disabled. The room
door can be open with all
the authorized cards.
LED signal
ACTIVATION CARD
LED signal green
None
-
-