Publicidad
Idiomas disponibles
Idiomas disponibles
2. After machine start-up, check the operation of the auger to ensure the for-
ward direction of rotation will move the chips toward the discharge tube. If the
auger is turning so that the chips are not being moved toward the discharge
tube, change parameter 209 bit "Rev Conveyor" from 1 to 0 or 0 to 1 to change
the direction.
w
-D
h
aSh
own
*Option – This bracket is only shipped on machines that have a factory in-
stalled chip auger.
The wash-down hose
bracket is shipped
in the stowed posi-
tion; lush against
the back of the
machine, on the right
side. Before use, the
bracket must be re-
oriented. Remove the
one BHCS, turn the
bracket around and
re-install the screw.
Refer to the Maintenance chapter of the Operator's manual for
maintenance issues.
Note that the Mini-Mill does not have a gearbox or a TSC system; disregard
these maintenance sections.
96-0038 Rev M
August 2010
B
*
oSe
racket
Front of
Machine
3. MAINTENANCE
Front of
Machine
7
Publicidad
