LUND Hitch Rack Guia De Inicio Rapido página 3

Installation Steps
Insert primary support tube over secondary support
tube and install lock pin.
9
Install wings into T bar. Secure in place with
(2) lock pins.
11
WARNING: Do not block taillights, brake lights, or turn signals. Always install T-bar with reflective tape
facing away from vehicle. Do not use after dark or in low light conditions.
Congratulations!
You have purchased one of the many quality Lund
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from drawings.
install lock pin
install (2) lock pins
®
branded products offered by Lund International, Inc. We take the utmost pride in
Lund International, Lund Accessories Division
300 Horizon Drive, Suwanee, GA 30024
800-328-5863 • Visit us at lundinternational.com
© 2007 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
Install T bar into primary support tube. Secure
10
Adjust height of primary support tube as neces-
sary to align with roof height. Install safety flag and
secure in place with lock pin.
12
Page 3 of 3
in place with lock pin.
Reflective tape
facing away
from vehicle.
install lock pin
Adjust height
install lock pin