Installation Steps - LUND Hitch Rack Guia De Inicio Rapido

Installation Steps

Install T bar into secondary support tube.
Secure in place with lock pin.
install lock pin
3
Install safety flag to secondary support tube.
Secure in place with lock pin.
install lock pin
5
SUV INSTALL
Insert Extension (if needed) into receiver. Insert hitch
pin. (Hitch pin not supplied).
NOTE: Do not use product in horizontal position when
7
vehicle is running to prevent exhaust gases from entering
NOTE: Actual application may vary slightly from drawings.
Reflective tape facing
away from vehicle.
Extension
passenger area.
Install wings into T bar. Secure in place with
install lock pins
4
Lower tailgate of vehicle. Adjust height of T
bar to be level with truck bed.
Adjust height
6
NOTE: Wings can be removed, rotated 90 degrees, and
reinstalled to create a flat workspace support.
Insert secondary support tube over extension and
8
Page 2 of 3
(2) lock pins.
install lock pin.
install lock pin