Ega Master DRAINMATIC MAX 600 Manual De Instrucciones página 9

1. Plug in the machine (switch must be in "OFF" position")(1).
2. Choose the suitable drill and the necessary number of rods for each situation (2).
3. Introduce the drill with the hand in the pipe or place that is desired to unblock until it makes top
with the obstructed zone (Using protection gloves) (3 and 4).
4. Switch on the machine (select "FOR" position).
Note: OFF – Stop
FOR – Forward rotation
REV – Reverse rotation
5. The pier will start rotating (6) at the speed selected by the shifter (7 and 8) cleaning the
obstructed area. There is also a brake handle (7).
6. Once the pipe is totally clean, switch off the machine (select "OFF" position) (1).
7. Remove the spring of the tube by hand.
8. Release the rods and augers (see next section) (9).
Unplug it of the mains.
OFF
OPERATING INSTRUCTIONS
REV
FOR
9