Switch on the camera:
1.
In camera mode, press the Up/Flash button (6) until the
on the lower left corner of the LCD screen. The auto flash function will be
activated.
2.
In camera mode, press the Up/Flash button (6) until the
the lower left corner of the LCD screen. The flash function will be activated.
3.
In camera mode, press the Up/Flash button (6) until the
the lower left corner of the LCD screen. The flash function will be disabled.
1. In camera mode, press the Power/Menu button (8) to enter the settings
menu (the battery level and the number of photos/videos stored in memory
are displayed on screen).
2. Use the Up (6) or the Down (12) buttons until the "Resolution"
appears, then press the Shutter button (2) within 5 seconds.
3. Use the Up (6) or the Down (12) buttons to select the desired resolution,
then press the Shutter button (2) within 5 seconds to confirm your choice.
There are 3 resolution modes:
1. In camera mode, press the Power/Menu button (8) to enter the settings
menu.
2. Use the Up (6) or the Down (12) buttons until the "Self-timer"
appears, then press the Shutter button (2) within 5 seconds to turn on the
self-timer function.
3. The digital camera will take a picture 10 seconds later.
Note: The self-timer feature is automatically turned off after the picture has
been taken.
DJ030seriesIM0109.indd 14
FLASH FUNCTION
Auto Flash
Flash on
Flash off
SELECTING THE PHOTO RESOLUTION
High resolution (1600 x 1200 pixels).
Normal resolution (1280 x 1024 pixels).
Low resolution (640x480 pixels).
SELF-TIMER (CAMERA MODE ONLY)
icon appears
icon appears on
icon appears on
1
icon
icon
16/3/09 10:45:27