Publicidad
Step 11
1
D
D212
Pull the DRAWER FRONT BRACKETS (8G) apart and slide them
å
into the grooves in the DRAWER SIDES (D212 and D213). You
may need to gently tap them in with a hammer.
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
å
"LH" for easy identifi cation.
Fasten a DRAWER FRONT (D) to the DRAWER FRONT BRACKETS (8G).
å
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
3
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M65) to the DRAWER FRONT (D).
å
Tighten one HIDDEN CAM.
www.sauder.com/services
D213
Push down
8G
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1
2
M65
D
2
D212
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (B30) into the grooves
å
in the DRAWER SIDES (D212 and D213) and DRAWER
FRONT (D).
4
D212
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the DRAWER BACK (D476) to the DRAWER
å
SIDES (D212 and D213) and DRAWER BRACE (M65).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Repeat this step for the other drawer.
418529
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the groove.
B30
U N
F I N
I S H
E D
D
D213
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
D476
M65
D213
Page 15
Publicidad
