Publicidad
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Thank you for choosing a Sanus Rack Accessory. The CAPS27 is designed to work with any 19 in. (48.26 cm) rack.
WARRANTY
The Sanus CAPS27 is covered by a fi ve year product warranty against manufacturer's defects. If you have any questions or
experience any problems with your Sanus product, please contact Sanus Customer Service.
Specifi cations
27 U vertical power strip
Electrical rating : 15A 125V AC 60Hz 1875W
15A Circuit Breaker
20 NEMA 5-15R. Spaced and dense outlets alternate
9 foot cord SJT 14A/3C, NEMA 5-15P
UL, cUL listed
CAUTION:
Avoid potential personal injuries and property damage!
To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors!
Risk of Electrical Shock. Do not plug into another relocatable power tap.
This device features an internal protection that will disconnect the surge protective component at the end of its useful
life but will maintain power to the load - now unprotected. If this situation is undesirable for the application, follow the
manufacturer's instructions for replacing the device.
Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and the
electrical service panel.
The input plug of this power tap is intended to serve as the disconnect device, it shall be easily accessible and withdrawn.
This power conditioner does not contain internal Circuit Breaker protection; INSTALLER MUST ensure that the input of
this power conditioner is connected individually to an electrical service panel that is protected with a UL Listed 20A
(Minimum) Circuit Breaker for overload protection of the power conditioner.
All doors and accessories must be grounded.
Do not use this product for any purpose not explicitly specifi ed by Sanus.
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this
product, contact Sanus Customer Service or call a qualifi ed contractor.
Sanus is not responsible for damage or injury caused by incorrect assembly or use.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature
of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the
equipment in an environment compatible with the maximum ambient temperature (0-40°C/32-104°F) specifi ed by the
manufacturer.
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air fl ow required for safe
operation of the equipment is not compromised.
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved
due to uneven mechanical loading.
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the
eff ect that overloading of the circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be
given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
6901-002135 <00>
English
3
Publicidad
