Sanus VuePoint FPA400 Manual Del Usuario página 10

STEP 1
Attach the Wall Plate to the Wall - Drywall Option
IMPORTANT:
For stacking configurations, stack from the top down.
Remove the front (F) and top (T) covers from the wall plate
1. Level the wall plate
CAUTION:
●
Mount the wall plate
●
Drywall covering the wall must not exceed 13mm (1/2 in.).
●
Do not install anchors into the seam between drywall pieces.
2. Drill pilot holes.
IMPORTANT: Pilot holes MUST be drilled to a depth of 38 mm (1½ in.) using a 10 mm (3/8 in.) diameter drill bit.
1
10
and mark the hole locations.
06
Avoid potential injuries or property damage!
directly onto the wall.
06
(T)
06
(F)
.
06
2