Dust Bag Replacement - Kenmore 116.34924 Manual Del Propietário

Check motor safety filter frequently and
change when dirty,
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the vacuum
cleaner without the motor safety fil-
term Be sure the filter is dry and
properly installed to prevent motor
failure andtor electrical shock.
Remove the dust bag as outlined in the
DUST BAG REPLACEMENT section,
MOTOR SAFETY FILTER
(ELECTROSTATIC)
1. The filter must be "{-_'_,.,._
replaced when dirtyr
It should be replaced Motor
regularly depending safety ,,_."_i¢_.-."11%
on use
conditions,
Filter ! -_-_ ._-_.
The filter CANNOT . _i_'?F_/_'_
lose its dust
trapping ability,
Note: See PARTS
AND FEATURES for
motor safety filter number
Motor
Safety
Filter
2. If the filter, locat-
ed in the bottom of
the bag cavity, is
dirty, remove it by
pulling forward and
out from under the
ribs°
3. Replace the
filter, smooth
(white) side up,
by sliding it back
into place under
the ribs in the bag
cavity.
Motor
Safety
Filter
Replace the bag as outlined in the DUST
BAG REPLACEMENT section,
EXHAUST FILTER
(HEPA)
The exhaust filter cartridge must be
replaced when dirty. It should be replaced
regularly depending on use conditions. The
filter CANNOT be washed as it will lose
its dust trapping ability.
Note: See PARTS AND FEATURES for the
exhaust filter number
I, Slide the Bag
exhaust filter Cover .....
cover release
down,
Exhaust Filter
2. Pull out on
exhaust filter
cover to remove
from bag cover,
/N
Exhaust
Filter Cover
3. Remove the
exhaust filter
cartridge from the
bag cover.
4. Replace the
exhaust filter
cartridge, carefully
positioning it so that it
fits into the bag cover.
The black edge of
the filter should be
facing away from
the operator, Push
only on filter cartridge
frame, not on filter itself
Bag
Co ver
Exhaust
Filter
i
J
I
Exhaust Filter
Cover Release
Exhaust
Filter Cover
5, Replace the
exhaust filter
cover and secure
the latch by
pushing it upward
t6