Timer
• Timer setting range is from 1 minute up to 23 hours, 59 minutes.
• When the time displayed is above 1 hour, the time is formatted as Hours : Minutes
• When the time displayed is below 1 hour, the time is formatted as Minutes' Seconds"
• To clear Timer settings, press and hold TIMER Button.
Countdown
Press + or - Buttons until desired time appears on Timer display.
Press TIMER Button to start countdown.
To stop Timer at any time, press TIMER Button.
To restart after stopping, press TIMER Button.
Timer alert: Thermometer will emit short beeps. 0'00" will flash on display.
Press any key to stop Timer alert.
Count up
Press TIMER Button to start count up.
To stop Timer at any time, press TIMER Button.
To restart after stopping, press TIMER Button.
Timer stops at 24:00. Timer alert will beep and display will flash.
Count up can only be started when Timer display reads 0'00".
Quick Hints for Using the Thermometer:
• To activate LCD backlight at any time, press any button on Thermometer when powered ON.
• Quick scroll feature is programmed into UP and DOWN Buttons and the + and - Buttons. To scroll
quickly, press and hold buttons.
40
• If no buttons are pressed after :05 in SET mode, the current flashing selection will become selected
by default.
• If a meat option is not selected, beef is the default selection.
• If a recommended doneness option is not selected, WELL DONE is the default selection.
• The Thermometer measures temperatures as low as 32°F (0°C) and as high as 390°F (199°C). "LLL"
will be displayed below 32°F (0°C) and "HHH" will be displayed above 390°F (199°C).
Thermometer Alerts:
• Food is within 10°F(5°C) of Target Temperature: Beeps 6x.
• Food at Target Temperature: Short repeating beeps and flashing Quick-Read Bars and Temperature
displays. Press any key to stop alert.
• Probe disconnected: Continuous beep. Press any key to stop alert; then reconnect Probe.
• Timer is flashing 0'00" and repeating beeps are sounding, indicating that the time set has expired.
Press any key to stop alert.
In order to prolong the life of this Thermometer, Weber does NOT recommend:
• Submerging Thermometer or Probe under water.
• Mixing old and new batteries or different brands of batteries.
General Care and Usage:
• After each use, clean stainless steel Probes with hot, soapy water and dry thoroughly. Never immerse
Probes in water while cleaning.
• Wipe the Thermometer with damp cloth.
• To prolong the life of the Thermometer, always store indoors between uses.
• Recommended for use with barbecues or ovens only.
• When using Thermometer with a charcoal kettle or smoker, use care when placing lid on wire.
Excessive force can crush the wire, making it inoperable.
m WARNING: Keep the stainless steel probe sensors and wires away from children.