DWT BS07-75 V Manual Original página 15

• Do not work materials containing asbestos� Asbes-
tos is considered carcinogenic�
• Never use power tools for sanding workpieces that
contain magnesium�
• Never use worn, damaged or dirty surfaces belts�
• Turn on your power tool before touching the work-
piece being processed�
• Avoid stopping an electric tool motor when loaded�
• During operation watch the position of a power cable
(it should always be positioned behind the tool)� Do not
allow it to whip around your legs or arms�
• Keep your hands at a safe distance from moving
parts of the power tool�
• The dust created during the work may be hazard-
ous to one's health, inflammable or explosive, hence
one should clean the work place at relevant times
and use personal protection means� Always use dust
removal / collection appliances (special vacuum clean-
er, dust bag)�
• When grinding small workpieces too light for reliable
fixation, always use clamping appliances.
• Operation may produce sparks and small metal par-
ticles, which can cause injury to the operator or to the
bystanders� Always wear means of individual protec-
tion (goggles and protective mask), as well as arrange
your working place in a proper way�
• Do not touch the sanding belt and the surfaces of
workpieces during or immediately after working, as
they become hot and untouchable to them until they
are completely cooled�
• After the power tool is switched off, the sanding belt
keeps moving mechanically for some time, therefore
put the power tool aside only after the sanding belt is
completely immobile�
• When emptying the dust collection device, one
should maintain particular caution� Never dispose of
the dust in an open fire.
Warning: the chemical substances con-
tained in dust generated in sanding,
cutting, sawing, grinding, drilling and
other construction industry activities
may result in cancer, congenital deficiency or be
harmful to the fertility. The ion of some chemical sub-
stances shall be:
• Before any repair and replacement work to the ma-
chine, the power plug must be pulled out firstly.
• The transparent two silicon oxide and other ma-
sonry products in the wall bricks and cement; the
chromium arsenic (CCA) in wood with chemical treat-
ment� The harm degree of these substances shall
depend on the frequent degree of you carrying out
these works� If you want to reduce the contact with
these chemical substances, please work in the place
with ventilation and you shall use the appliances with
safety certificates (such as the dust mask designed
with tiny dust filter).
Notice the power voltage: in power connection, you
must confirm that if the power voltage is the same to
the voltage marked in the tool's data plate� If the power
voltage is higher than the appropriate voltage, the acci-
dents will be resulted to the operators, and at the same
time, the tool will be destroyed� Therefore, if the power
voltage has not been confirmed, then you shall never
plug in arbitrarily� On the contrary, when the power
voltage is lower than the required voltage, the motor
will be damaged�
Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol
English
15
Symbols used in
the manual
Meaning
Belt sander
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
BS ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Double insulation / protec-
tion class�