Hekatron Genius Plus Manual Del Operacion página 17

Smoke alarm installati on
4.1
Installati on with screws/dowels
1. Install the base of the smoke
alarm with the provided installa-
ti on material at the ceiling. For
single-hole installati on, the small
fastening pad is recommended.
Pull off the protecti ve foil and
apply the pad as anti -rotati on
protecti on during installati on and
removal of the smoke alarm. For
installati on with 2 screws, the
fastening pad is not required.
2. Aft erwards, att ach the smoke
alarm to the base in such a way
that the round anti -tamper seal
EN
17