Software Installation - Sony SFD-FW200P Guía De Instrucciones

Installation

Software Installation

14
The HiFD driver software must be installed from the
installation disk before the drive can be used. This HiFD driver
software is exclusively for use with Windows 95/98.
1
Install HiFD hardware and switch it on.
2
Turn on PC.
3
After the system boots up on your PC, insert the supplied
"Installation Disk 1" in the PC's floppy drive.
4
Click [Start] button on the task bar and click [Run].
5
Type "A:\setup.exe" and click [OK].