Getting Started - Corsair VOID WIRELESS Guía Rápida Del Usuario

GETTING STARTED

Connect the wireless USB adapter to any working USB port on your PC or
connect the base station extension (included with the SE version), and
then attach the wireless adapter to the extension cable.
Using the USB extension base station may extend the wireless range of
your Corsair VOID Wireless Headset, by enabling you to position the
antenna for best reception. The Corsair VOID Wireless Headset is designed
to operate at a range of up to 40 feet (12m) from the wireless adapter, but
other wireless devices, electronics, and obstructions such as walls may
reduce wireless range.
IMPORTANT:
The first time you use the Corsair VOID Wireless Headset
adapter on a PC, the operating system will automatically install the device
driver. After the device driver loads, we recommend you reboot your PC
before use.
CHARGING 1
IMPORTANT:
The Corsair VOID Wireless Headset must be fully charged before its first use.
• Connect the USB charging cable to any working USB port on your PC
• Connect the USB charging cable to the Corsair VOID Wireless Headset.
The Corsair VOID Wireless Headset battery has no "memory effect", so there
is no need to completely discharge it before recharging. The lithium-ion
battery in the Corsair VOID Wireless Headset will last for hundreds of charge/
discharge cycles.
Remember that the USB charging cable requires a high power (USB 2.0 or
better) port. Some USB ports found on older devices do not support USB 2.0
CHARGING WHILE POWER IS OFF:
When the VOID Headset is OFF, and CHARGING with a connected USB cable,
ONLY the InfoMic reports the charge and battery status:
InfoMic Displays:
RED (PULSING): Very Low Battery (0-20%)
AMBER (PULSING): Low Battery (21-84%)
GREEN (PULSING): Nominal Battery (85-99%)
GREEN (SOLID): Fully Charged (100%)
8