Turboair Kitty Manual De Montaje Y Modo De Empleo página 14

Mounting
Before beginning installation:
• Check that the product purchased is of a suitable size for
the chosen installation area.
• Remove the charcoal (*) filter/s if supplied (see also
relative paragraph). This/these is/are to be mounted only
if you want lo use the hood in the filtering version.
• Check (for transport reasons) that there is no other
supplied material inside the hood (e.g. packets with
screws (*), guarantees (*), etc.), eventually removing
them and keeping them.
Expansion wall plugs are provided to secure the hood to most
types of walls/ceilings. However, a qualified technician must
verify suitability of the materials in accordance with the type of
wall/ceiling. The wall/ceiling must be strong enough to take
the weight of the hood. Do not tile, grout or silicone this
appliance to the wall. Surface mounting only.
Operation
Model with SOFT-TOUCH control panel
To select the functions of the hood, simply touch the
commands:
a. Button to increase suction speed (power):
Suction speed (power) 1
Suction speed (power) 2
Suction speed (power) 3
Note: suction speed (power) 3 is timed, after
approximately 5 minutes the hood returns to suction
speed (power) 2.
b. Button to decrease suction speed (power).
c. Button ON/OFF hood
d. Button ON/OFF lighting
e. Button ON/OFF programmed switching off:
it programs switching off of the active suction speed
(power) after approximately 3 minutes.
Models with mechanical control panel
a. ON/OFF light switch
b. Speed 1/OFF switch
c. 2-speed selection
d. 3-speed selection
Models with knob
0
1
2
3
A
B
C
D
14
OFF
Speed 1
Light OFF
Speed 1
Light OFF
Speed 1
Light OFF
Light ON
Speed 1
Light ON
Speed 1
Light ON
Speed 1
Light ON