Setting Up Your Favourites - Ebode TAKE 10 IR/RF Manual Del Usuario

Pressing Save Code at screen [5] takes you to screen [6] where you can set up your Universal
Remote to control a Cable box.
Please note, you can quit at this point and set up other devices later, or you can continue
and set up other devices, such as DVR's, VCR's or CD Players.
For a unknown brand
If you select 'No' at screen [1] (Do you know what brand you have?) then the procedure will
be very similar, the only difference will be that you will be searching through the entire library
of codes for your device, not just the codes for your brand, e.g. Phillips.
If you select 'Yes' when asked if you know your brand, but subsequently didn't find a code
that works, you will be asked if you want to try again (in case you maybe missed it), or try all
the codes for your device.
If you have tried all codes for your device and still don't find the right code, you can skip the
device, or select 'Learn'. If you select Learn you can then learn the commands for your
device from its current remote control's.

4.3 Setting Up Your Favourites

Once you have been through the Wizard and set up your devices (or at least a TV and
skipped the rest of the device setup) you will arrive at screen [1] below.
[1] [2] [3]
Pressing the Right Navigation Key will take you to screen [2].
Here you can enter a channel using the number keys on the remote. For example you might
enter channel 107. You can also include the 'Enter' or 'OK' buttons at the end of the channel
if your device requires one of these buttons to be pushed to change the channel, e.g.
'107Ok' or '107Ent'.
You can now press the Side Key next to Pick Logo on screen [2].
A screen [3] containing channel icons will appear.
Pressing the Next Key (Side Key 10) or the Back Key (Side Key 5) will allow you to scroll through
the icons. In this example we have selected the CNBC icon by pressing the corresponding
Side Key. Screen [4] now shows that we have chosen Channel 4, and the CNBC logo.
The device picked in the sample was Cable, you can change the device by pressing the
Side Key next to 'Pick Device'.
Each time you activate a favourite the remote will control the device programmed, e.g.
when the CNBC favourite is selected the remote will send a command to your cable box. As
an example you may wish to program a Channel 10 favourite which sends a command to
your TV or Set Top Box.
16-8-2010 9 033000=15090C