Amoena CONTACT Instrucciones De Uso página 18

ENG
A special pump is required to fill the chamber with air or drain the air from the chamber.
Small quantities of silicone oil, which can form on the cannula of the pump, do not impair
the function and quality of the breast form or pump. Simply wipe away the oil with a clean
cloth.
3
Adjusting Adapt Air
1. Lay out the breast form and pump ready for use. Breast form and pump are separate.
Diagram 5 page 3
2. Place the pump (1) under the bra strap on the opposite side so that you have both hands
free. Pull the bra strap off the shoulder of the operated side. Diagram 6 page 3
3. Connect the pump by removing the grey tag (if present) and inserting the cannula (4)
into the opening (5) of the breast form marked with a white arrow. Open the valve inlet
by gently squeezing your thumb and index finger together. Guide the cannula completely
into the valve. Diagram 7 page 4
18
IFU_BreastForms_Premium_ID1285_011220.indd 18 IFU_BreastForms_Premium_ID1285_011220.indd 18
4
2
1
5
1. Pump ball
2. Drain valve
3. Hose
4. Cannula
5. Valve opening
DE
02.12.2020 09:08:53 02.12.2020 09:08:53